BELTING: PVC-120 black.
DRIVE PULLEY: 4″ dia. with 1-3/16″ dia. shaft or 8″ dia. with 1-7/16″ dia. shaft, both crowned and fully lagged.
CARRIER ROLLERS: 1.9″ dia. x 16 ga. steel rollers, model 196S.
TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30′.
TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED: 7″ x 12 ga. channel frame. Bed sections attached with couplings and floor supports.
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9″ dia x 16 ga. steel roller, model 196S.
ELECTRICAL CONTROLS: Optional