BELTING: PVC-120 black.
DRIVE PULLEY: 4″ dia. with 1-3/16″ dia. shaft or 8″ dia. with 1-7/16″ dia. shaft, both crowned and fully lagged.
TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable.
BELT SPEED: 60 FPM, constant.
BED: 4-1/2″” x 12 ga. channel frame with 14 ga. slider bed 9″-27″ BF; 12 ga. bed 33″ BF and above with bed pan braces
FLOOR SUPPORTS: Optional
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.Slider Beds, Slider Beds, Slider Beds, Slider Beds
SAFETY POP-OUT ROLLERS: Mounts into slot on bracket for safety design. Use of connector bracket eliminates dangerous pinch points
ELECTRICAL CONTROLS: Optional