Incline Roller Bed

BELTING: Black PVC rough-top. DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft, both crowned and fully lagged.

CARRIER ROLLERS: 1.9″ dia. x 16 ga. steel rollers, model 196S.

TAIL PULLEY: 4″ dia., crowned, with 1-3/16″ dia. shaft.

CENTER DRIVE: Reversible drive with 24″ belt take-up.

NOSE-OVER: Provides smooth transition from incline to horizonal position. Single nose-over adjust 0-20 degrees; double nose-over adjust 0-35 degrees.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED: 60 FPM, constant.

BED: 7″ x 12 ga. channel frame.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ELECTRICAL CONTROLS: Optional

Product Questions?

Ask away! We’ll be happy to answer your question about this product. Or call us at 972-704-2120 to speak with a customer service representative.

  • This field is for validation purposes and should be left unchanged.