Call +001 555 801

Zero Pressure Medium Duty (Photo Eye Sensing) Zoom

Click Image To Enlarge

Zero Pressure Medium Duty (Photo Eye Sensing)

Be the first to review this product




TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S.

PRESSURE ROLLERS: 1.9" dia. x 16 ga. steel, model 196S; 8" BF with 6" wide belt.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

BELTING: 6" wide black PVC-120 COS.

DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft; both crowned and fully lagged.

END PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

SPEED: 60 FPM, constant.

BED: 7" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.

SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.


MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ACCUMULATION: Zone singulation operation; 3" RC = 2'-0" long zones; 4-1/2" RC = 3'-0" long zones. 1'-0" of live roller at each end of conveyor over end plates remains "live" during operation. Zones are pneumatically actuated using photo electric sensors.

PNEUMATIC ACTUATION: Maximum air line pressure should not exceed 30 PSI.

FRL: Unit is provided with filter, regulator, lubricator with 1/4" ports.



Product Questions?

Ask away! We'll be happy to answer your question about this product. Or call us at 855-259-9706 to speak with a customer service representative.

  • Security Code

* Required Fields